Specifications

Powerful 400W RMS/700W Peak Amplification

A powerful 400W RMS/700W peak power high-efficient amplifier makes this subwoofer an ideal choice for the most demanding of situations. It offers a high power output while maintaining a low distortion signal and tight control of the driver.

Linear Tuned-Port

This subwoofer utilizes a linear tuned-port enclosure that achieves tighter bass by extending deep bass response and eliminates unwanted turbulence.

Phase Control Switch

The Phase switch determines whether the subwoofer speaker's piston-like action moves in and out with the main speakers. Proper phase adjustment depends on several variables such as room size, subwoofer placement and listener position. Adjust the phase switch to maximize bass output at the listening position.

Low-Frequency Effects (LFE) Input

This subwoofer offers a Low-Frequency Effects input that essentially adjusts for low-frequency Dolby Digital/DTS effects from your receiver.

Low-Frequency Response

With a frequency response of 25 - 150 Hz, this subwoofer offers a full range of low-frequencies with the capability of reproducing a very tight bass-response throughout your home theater.

Magnetically Shielded

Its housing is designed with magnetic shielding, preventing undesirable interference that causes distortion.

Amplifier Power (RMS): 400 Watts

Peak Dynamic Power: 700 Watts (the Peak Dynamic Power is measured by Recording the highest center-to-peak voltage measured across the Output of a resistive load equal to minimum impedance of the transducer, using a 50Hz sine wave burst, 3 cycles on, 17 cycles off)

Low-Frequency Transducer: 12" (300mm) PolyPlas

Inputs: Line-Level, LFE

Low-Pass Frequency: Adjustable from 50Hz to 150Hz

Frequency Response: 25Hz - Low-pass crossover setting

Dimensions (H x W x D): 19-3/4" x 15-3/4" x 16-7/8" (502mm x 400mm x 428mm)

Weight: 43 lb (19.5kg)

Tech specs