MODEL

UPC

ASIN

ALTERNATE IMAGES

FEATURES

*
Manufacturer - Universal Remote Control Inc
*
Model - MRF-350
*
RF Enabled - Yes
*
User Programmable - No

MANUFACTURER APPROVED PRICE

$^.

RETAIL PRICE

$^.

Description

Universal Remote Control MRF-350 Optimizing Narrow Band Reception with MC - MRF350

The MRF-350 is equipped with adjustable IR line outputs. Each output can be individually matched to rear panel IR inputs on any component that is designed to be operated by a standard IR repeater. The outputs utilize a 3.5 mm jack. You can control six identical components or zones - up to fifteen MRF-350s in the same installation. The MRF-350 has six "addressable" IR Line Outputs. For example, you can control up to six identical TVs with one MRF-350 or route volume commands for a specific zone to a particular zone IR input on a multi-zone pre-amp. If you have more than six identical components or zones, up to 15 MRF-350s can be separately installed to control them - thereby allowing up to 90 identical components or zones in one house.

In The Box

1 - RFX-250 RF Sensor with integrated antenna
1 - Mounting plate for RFX-250
1 - MRF-350 Base Station
1 - Mounting Plate for wall mounting the MRF-350
8 - Screws for wall mounting the two mounting plates
1 - 9V-300mA Power Supply
6 - Visible Flashers with 10 foot plug in cables.
6 - Extra self adhesive pads for Emitters
1 - 12’ Connecting Cable
1 - Adjustment Tool (Screwdriver for RF ID and IR level adjustment)
2 - Depluggable screw connectors for RF connections when extending wires.

Specifications

Universal Remote Control MRF-350 Optimizing Narrow Band Reception with MC - MRF350

Interference Rejection and Extended RF Range via RFX-250 The MRF-350 receives RF (radio frequency) signals via the RFX-250 RF Sensor. The RFX-250 displays RF interference via a bright red LED, which flickers when interference is present. Simply relocate the RFX-250 out of the interference.

Expand Range by Adding RFX-250 RF Sensors in Remote Areas The MRF-350 can power up to three RFX-250 RF Sensors connected in parallel to the RF Input connector.

Variable IR Output Matches Rear Panel IR Inputs The MRF-350 is equipped with adjustable IR line outputs, each output can be individually matched to rear panel IR inputs on any component that is designed to be operated by a standard IR repeater.The outputs utilize a 3.5mm jack.

Up To Fifteen Equipment Locations With Identical Components Each MSC System remote is “addressable.” They can be programmed to specifically control components in a particular room by installing a base station at each location. In operation it’s simple: when you select a device located in the Den, the MX series remote only sends commands to the Den. When you select a device located in the Family Room, the MX-3000 only sends commands to it.

A Single MRF-350 Can Control an Array of Identical Components or Identical Zones of a Multi Zone Preamp/Matrix Switcher Each MRF-350 has six “addressable” IR Line Outputs. For example, you can control up to six identical TV’s with one MRF-350 or route volume commands for a specific zone to a particular zone IR input on a multi-zone preamp. If you have more than six identical components or zones, up to 15 additional MRF-350s can be installed to control them (thus allowing up to 90 identical components or zones in one house).

IR Input for Keypads or IR Repeater Systems The MRF-350 rear panel IR input will relay IR Data from IR repeaters or Multi-Zone Keypads to all IR line outputs (does not support IR routing).The 5V, 100 milliamp output will directly power some brands and models of keypad directl8

Tech specs